Anti-slip stainless steel strip 25 mm
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability
Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice
If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.
- AISI 304 stainless steel, satin (ground) finish
- Improves the slip resistance of the floor (CTE DB-SUA)
- Installation on stairs and ramps without building work
- Version without adhesive and with adhesive layer
- Protective film, lengths 1 and 2 m
- Packs of 50 pcs, minimum order 50 pcs
- Width 25 mm
Prices by finish
After you click on a finish, the price per linear metre and per piece is shown according to the size. You select the length of the profile in the table. We sell whole packs only: a pack contains 50 pcs, the minimum order is 50 pcs per finish and size, then in multiples of 50 pcs. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability. Prices are excl. VAT.
Satin (ground) stainless steel, without adhesive
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
| Width | Length | Price per lm | Price per piece | Pack |
|---|---|---|---|---|
| 25 mm | 1 m | 370,00 Kč | 370,00 Kč | 50 pcs |
| 25 mm | 2 m | 370,00 Kč | 740,00 Kč | 50 pcs |
Satin (ground) stainless steel, with adhesive layer
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
| Width | Length | Price per lm | Price per piece | Pack |
|---|---|---|---|---|
| 25 mm | 1 m | 462,00 Kč | 462,00 Kč | 50 pcs |
| 25 mm | 2 m | 462,00 Kč | 924,00 Kč | 50 pcs |
Description
Decorative stainless steel strip suitable for fitting on ramps and stairs. Its anti-slip surface increases the slip resistance (Rd) of the floor it finishes, and thus helps to meet the Spanish building code CTE.
This ramp or step finish can be installed without building work, so it is ideal for renovations and refurbishment. It is also ideal for public spaces such as airports, shopping centres, hospitals and the like, as well as for homes.
The strip is also available in a DIY pack with an adhesive layer, ready for immediate installation.
Available in a satin (ground) finish. The material is protected by a protective film.
The strip is made of AISI 304 stainless steel for stairs or ramps. It has been tested and achieved high slip resistance, so it helps meet the requirements of document DB-SUA of the Spanish Building Code (CTE). Thanks to its design and properties, it is suitable for public places as well as residential spaces.
Use
The strip is designed to be fitted on stairs as well as on ramps. Its special visible surface provides high slip resistance and thus helps meet DB-SUA of the Spanish Building Code (CTE), because it improves the slip resistance value of the floor on which it is fitted. It can be placed at the start and end of changes in level in public spaces as a marking intended to prevent falls.
The 2001 Spanish technical guide to barrier-free buildings also recommends placing visual and tactile elements at the start of ramps or staircases to make access easier for people with reduced vision.
The strip is ideal for public spaces such as airports, hotels, hospitals and the like, but also for installation in flats and houses. Easy installation, requiring no building work, makes it particularly suitable for renovations and refurbishment.
Material
The strip is made of AISI 304 stainless steel. Every batch of the material used undergoes a chemical composition test to verify that it meets the alloy specification. The stainless steel was also tested for corrosion resistance and withstood 500 hours of exposure without signs of corrosion.
Stainless steel is a highly resistant and durable material with an excellent surface appearance that does not deteriorate over time. The available finishes are high gloss, a satin (ground) finish, or a future range with a titanium-containing coating. All finishes are smooth and low-porosity, which makes it easier to keep the installation hygienic.
Anti-slip properties
The chart in the datasheet compares the Rd value of the floor without the strip with the Rd value of the floor with the finishing strip fitted. It marks out the areas between the individual classes, so the improvement in the Rd value and in the floor class is clearly visible.
The table makes it possible to find the Rd value and the floor class after fitting the strip on the stair tread and to compare it with the floor without the strip. The values highlighted in green in the table mark cases where the improvement meant raising the original floor class.
- Floor Rd 15–15.5 (class 1): with strip 34.5–35 (class 1)
- Floor Rd 15.5–27.5 (class 1): with strip 35–45 (class 2)
- Floor Rd 27.5–35 (class 1): with strip 45–50 (class 3)
- Floor Rd 35–44 (class 2): with strip 50–59.9 (class 3)
Installation
If you will be painting or carrying out building work after fitting the strip, leave the protective film on until the work is finished.
- If you bought the strip without adhesive: clean the surfaces to be bonded to ensure perfect adhesion. Apply enough adhesive of the MS sealant / fast-setting adhesive type from Fischer or similar to the hidden side of the strip, place the strip on the required surface and press gently. Finally, let the adhesive dry and remove the protective film.
- If you bought a strip with adhesive tape or a DIY kit with adhesive: clean the surface the strip will be bonded to, to ensure perfect adhesion. Remove the film from the adhesive tape, place the strip on the required surface and press gently. Finally, remove the protective film.
Cleaning and maintenance
The material must be cleaned immediately after installation so that residues of mortar, cement or iron particles from wire wool or tools do not cause pitting corrosion.
Indoors, water with washing-up liquid, a cleaning product or liquid soap can be used to remove dirt and any fingerprints. For high-gloss surfaces, a glass cleaner can be used. There are special stainless steel cleaners on the market that clean it and reduce staining. Each time you clean stainless steel, rinse it well and dry it completely so that it does not become dull.
In more aggressive environments we recommend cleaning the strip regularly with clean water and then drying it.
- Steel wool and similar products are not recommended, as they can scratch the surface and cause pitting corrosion
- Take special care with materials containing chlorides, which are contraindicated because they cause oxidation
- Hydrochloric acid and iron products in long-term contact are not recommended
- Never use cleaners for ordinary steel on stainless steel
We sell in whole packs only: a pack contains 50 pcs, the minimum order is 50 pcs per finish and size, then in multiples of 50 pcs. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
Specifications
| Material | AISI 304 stainless steel |
|---|---|
| Finishes | brushed |
| Width (a) | 25 mm |
| Length | 1 and 2 m |
| Alloy | AISI 304 (composition test of every batch, AIMME) |
| Corrosion resistance (salt spray) | more than 504 hours without change for stainless steel (UNE 112017:92, AIMME); more than 650 hours without change for titanium-coated stainless steel |
| Slip resistance | excellent (UNE-ENV 12633:2003, AIDICO), see the table in the Anti-slip properties section |
| Version | without adhesive or with adhesive layer |
| Use | interior, exterior, floors |
| Pack | 50 pcs |
| Minimum order | 50 pcs of one finish and size, then in steps of 50 pcs |
| Delivery | within 12 working days subject to the supplier's stock availability |
More products