Anti-slip strip aluminium 35 mm with holes
Price for 1 piece (2.5 m) 722.50 Kč (28.90 €) excl. VAT 874.23 Kč (34.97 €) incl. VAT
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability
Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice
If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.
- Anodised aluminium, matt silver
- Width 35 mm, height 2.7 mm, length 2.5 m
- Supplied with countersunk screw holes
- Suitable for heavy traffic
- Also serves as a guide strip for the visually impaired
- Pack of 40 pcs, minimum order 40 pcs
Prices by finish
Click a finish to see the price per running metre and per piece. The strip is 2.5 m long. We sell in whole packs only: a pack contains 40 pcs, the minimum order is 40 pcs per finish and size, then in multiples of 40 pcs. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability. Prices are excl. VAT.
Matt silver (anodised)
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
| Width | Price per lm | Price per piece | Pack |
|---|---|---|---|
| 35 mm | 289,00 Kč | 722,50 Kč | 40 pcs |
Description
Flat profile made of anodised aluminium in a matt silver finish, designed for fitting on stair steps, ramps or walkway zones where protection against falls is to be increased.
The profile is supplied with countersunk holes and is easily fixed to the finished floor with screws. It is exceptionally durable, withstands heavy traffic and can be used as a guide strip for blind or partially sighted people, as a signal of possible hazards or as an anti-slip element.
It is available in a matt silver finish and in a length of 2.5 m.
Use
The profile can be fitted as a divider between floors, at entrances to business premises, on stair steps or on ramps.
It is suitable for accessible environments where tactile contrast is required. By placing several profiles side by side, a guiding path effect can be achieved.
Material
The profile is made by extruding aluminium. The matt silver finish is obtained by anodising, which improves corrosion resistance, mechanical strength and appearance.
Aluminium is a material with excellent chemical and physical-mechanical properties: it is light, strong, ductile, malleable and very resistant.
Installation
The profile can be fitted to practically any substrate in a completed building. It is supplied with countersunk holes for screw fixing. Each 2.5 metre profile has a total of 13 countersunk holes, the first is 50 mm from the end and the others are spaced 200 mm apart. A 3.5 × 30 mm countersunk screw is recommended.
- Make sure both surfaces are clean and dry
- Place the profile on the substrate and mark the holes in the required position
- Screw the profile down using suitable fixings
Cleaning and maintenance
The profile is resistant to water and detergents. Cleaning should be carried out regularly with a soft, lint-free cloth. When a neutral liquid cleaner is used, it must be rinsed off with cold water and dried to remove excess moisture. Stubborn dirt can be removed with suitable mildly abrasive cleaners.
- Do not use steel wool, abrasive or stripping products, strong acids (hydrochloric and perchloric), strong alkalis (sodium hydroxide or ammonia) or carbonate-based solutions
- Do not use citric acid either, as it dissolves the protective oxide layer on the surface of the aluminium
- Waxes, petroleum jelly, lanolin and similar substances are not suitable
- Avoid solvents containing haloalkanes (hydrofluoroethers and chlorinated solvents) and setting accelerators containing chlorides (use chloride-free accelerators)
We sell in full packs only: a pack contains 40 pcs, the minimum order is 40 pcs per finish and size, then in multiples of 40 pcs. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
Specifications
| Material | anodised aluminium |
|---|---|
| Finishes | matt silver (anodised) |
| Width (a) | 35 mm |
| Height (h) | 2.7 mm |
| Length | 2.5 m |
| Number of holes per profile | 13 countersunk holes (the first 50 mm from the end, spacing 200 mm) |
| Alloy | 6063 (AA and ASTM; L-3441 per UNE 38-301-89) |
| Reaction to fire | M0 (UNE 23-727-90) |
| Abrasion resistance | very good |
| Light resistance | excellent |
| Appearance and colour | EN 12373-1 |
| Use | interior, exterior |
| Pack | 40 pcs |
| Minimum order | 40 pcs per finish and size, then in multiples of 40 pcs |
| Delivery | within 12 working days subject to the supplier's stock availability |
More products