Water-based penetrating sealer for stone and grout joints LATICRETE STONETECH BULLETPROOF SEALER 1 l, 5 l
Price per 1 box (12 pcs) 7 776 Kč (311.04 €) excl. VAT 9 408.96 Kč (376.36 €) incl. VAT
In stock at an external supplier, delivery within 15 working days depending on availability at the supplier
Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice
If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.
- Offers maximum stain protection
- The best protection for the most porous natural stone, tiles, masonry and grout joints
- Preserves the original appearance of the surface
- The water-based formula is better for you and for the environment
- Sold by the full box
- Pack: 1 l, 5 l
Prices and packaging
Sold by full boxes. The table shows the price per piece and per full box. Prices exclude VAT. Minimum order 2 boxes (at least 10 000 Kč excl. VAT).
| Box | Pack | Price per piece | Price per box |
|---|---|---|---|
| 12 pcs | 1 l | 648,00 Kč | 7 776,00 Kč |
| 4 pcs | 5 l | 2 232,00 Kč | 8 928,00 Kč |
Prices are excl. VAT.
Description
Premium water-based penetrating sealer with maximum protection against the most stubborn oil and water-based stains on porous natural stone, tiles, masonry and grout joints. It does not change the natural appearance of the surface, for interior and exterior use.
STONETECH BULLETPROOF® SEALER is a premium water-based penetrating sealer designed to provide maximum protection against the most stubborn oil and water-based stains.
This professional sealer effectively penetrates the most porous surfaces of natural stone, tiles, masonry and grout joints in interiors and exteriors and does not change the natural appearance of the surface. It is a high-performance and safer alternative to solvent-based sealers; STONETECH BULLETPROOF SEALER is better for you and for the environment.
It is excellent for heavily used surfaces such as worktops, kitchen backsplashes, entrances, floors and walls.
Use:
- For interior and exterior use
- Worktops
- Kitchen backsplashes
- Floors
- Walls
- Heavily used surfaces, e.g. entrances
Features and benefits:
- Offers maximum stain protection
- The best protection for the most porous natural stone, tiles, masonry and grout joints
- Preserves the original appearance of the surface
- The water-based formula is better for you and for the environment
- For interior and exterior use
- Professional quality
- Does not alter the breathability or original colour of the material
Suitable substrates:
- Granite
- Marble
- Honed marble
- Natural stone
- Quartzite
- Travertine
- Sandstone
- Saltillo
- Bluestone
- Flagstone
- Grout
Specifications
| Manufacturer | LATICRETE |
|---|---|
| Product number | 24-D15130588-1, 24-D15130595-5 |
| State | liquid |
| Colour | clear / slightly yellowish |
| Odour | alcohol |
| pH | 5 |
| VOC content | 0 g/l |
| Consumption | ~8–12 m² per 1 l; consumption varies with the porosity and absorbency of the surface |
| Expected service life | up to 5 years on interior surfaces, up to 3 years on exterior surfaces; for the best result, renew the sealer annually |
| Surface temperature during application | 10 °C to 26 °C |
| Absorption time | 10–15 minutes |
| Full curing | 24–72 hours |
| Pack | 1 l × 12 pcs per box (40 boxes per pallet); 5 l × 4 pcs per box (32 boxes per pallet) |
| Availability by country | Europe including the Czech Republic and Slovakia |
| Note on data | Specifications may change without notice. The results given are typical and correspond to the test procedures used. Actual properties in practice depend on the method of application and site conditions. |
Technical information
Substrate preparation
- Read the entire label before use. Use only as directed.
- Always test on a small inconspicuous area with a 24-hour curing time to determine ease of application and the desired result. Allow new grout to cure for at least 72 hours before application.
- The surface must be clean and free of waxes and coatings. The surface temperature should be between 10 °C and 26 °C. Ensure good ventilation during application and until the surface is dry. Keep children and pets out of the area until the treated surface is dry.
Procedure
- Check that the cap is closed and tight, and shake well before use.
- Cover areas that are not to be treated.
- Generously apply an even coat of STONETECH® BULLETPROOF SEALER with a paint pad, roller or brush.
- Allow the sealer to soak into the surface for 10–15 minutes. During this time, keep the surface wet with sealer, adding more as needed. DO NOT ALLOW THE SEALER TO DRY COMPLETELY ON THE SURFACE.
- Wipe the entire surface thoroughly dry with clean absorbent cloths.
- Porous and absorbent surfaces may need a second coat. If a second coat is necessary, apply it within 30–40 minutes of the first application, following steps 3–5.
- If sealer residues appear, re-wet the affected area of the surface with sealer. Agitate the surface with a white nylon scouring pad to loosen the residues and wipe dry with a clean absorbent cloth.
- Full curing takes place within 24–72 hours. If the surface must be used earlier, cover the treated surface with red rosin paper until full curing is reached.
- Clean the tools used for application with water.
Cleaning tools
Clean the tools used for application with water.
Storage
2 years in factory-sealed packaging at a temperature above 10 °C (50 °F) and below 32 °C (90 °F). Store only in the original packaging. Do not freeze or store above 38 °C (100 °F).
Safety notice
- For further safety information, see the safety data sheet (SDS).
- Storage and handling: Store only in the original container. KEEP OUT OF REACH OF CHILDREN. Do not freeze or store above 38 °C (100 °F). Do not mix with other chemicals.
More products