Structural expansion joint profile all-aluminium, joints up to 50 mm
Movement joint profiles with EPDM insert + structural movement joints

Structural expansion joint profile all-aluminium, joints up to 50 mm

2 519 Kčexcl. VAT/lm3 047,99 Kčincl. VAT/lm
100.76 €excl. VAT/lm121.92 €incl. VAT/lm

Price for 1 piece (2.5 m) 6 297.50 Kč (251.90 €) excl. VAT 7 619.98 Kč (304.80 €) incl. VAT

In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability

Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice

If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.

Features
  • For structural joints up to 50 mm wide
  • Installed on the finished floor, also suitable for refurbishments
  • Ball joints for movement in several directions
  • Ribbed anti-slip surface for high-traffic areas
  • Perimeter version also available
  • Sold by the piece
  • Height 3.6 mm, length 2.5 m

Prices by finish

Once you click a finish, the price per linear metre and per piece, depending on the size, is shown. The profile is 2.5 m long. We sell by the piece, minimum order 1 piece. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability. Prices are excl. VAT.

Natural aluminium

In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.

Width Version Price per lm Price per piece Pack
50 mm standard 2 519,00 Kč 6 297,50 Kč 1 pcs
50 mm perimeter 2 870,00 Kč 7 175,00 Kč 1 pcs

Description

An all-aluminium profile system, designed for installation in covered movement joints up to 5 cm wide. Thanks to its shape with ball joints, it allows movement in several directions. The dimensions of the side parts allow secure anchoring using the fixings supplied.

It has a ribbed anti-slip visible surface and is therefore a suitable model for high-traffic zones. A corner version for perimeter (peripheral) joints is also available. It is supplied in the natural colour of aluminium.

The profile is supplied pre-assembled, with a protective film on the surface, and is installed on the joints of finished floors once the work is complete. Its construction with sliding parts allows it to absorb large movements in several directions. The profile is screwed to the finished floor and, thanks to its shape, allows smooth passage of cars, trolleys or stretchers.

Fire-resistant cords are available for the profile.

Use

Buildings and structural elements are subject to deformation and geometric changes. Movement joints help limit the impact of these changes on the whole building and prevent defects from arising.

The Spanish building code CTE, in its section DB-SAE (Actions on building structures), states that in concrete or steel buildings movement joints should be designed so that no continuous elements longer than 40 m arise.

The profile is a solution for structural joints and consists of an assembly of sliding aluminium parts. It absorbs the stresses and deformations caused by building elements and prevents cracks and other defects from arising. It is suitable for installation in a floor, but can also be installed on a wall.

It is designed to be installed in medium-sized joints in buildings that are already complete, which makes it the ideal choice for refurbishments and renovations or for projects where movement joints were not planned in time.

Material

The profile is made by extruding aluminium. Aluminium is a material with excellent chemical and physical-mechanical properties. It is light, strong, flexible, ductile and highly durable. Its resistance to corrosion and fire is very good.

Aluminium is highly valued and used in many industries, especially in construction. It can be processed in many ways to obtain a wide variety of shapes with high performance in use. It is a recyclable material.

Permitted traffic

Occasional traffic. The profile withstands light and medium loads, including pedestrian and vehicle traffic. It is suited to the passage of passenger cars or trolleys with pneumatic tyres (DIN 1072) up to 35 kN and occasionally to heavy traffic with pneumatic tyres.

Installation

The profile is supplied assembled and fitted with a protective surface film. It is installed on the joints when finished floors are installed. The width of the structural joint is a requirement set in the project. Make sure the chosen model matches the properties specified by the project. When installing, follow these steps:

  1. Make sure the surfaces on which the profile is installed are free of dust and grease.
  2. Place the profile in the joint space and slide the side parts as far as they will go so that they sit flush with the edges of the joint. The forks must be centred and allow free movement.
  3. Fix the profile with mechanical fixings through the holes in the mounting wings. The screws must be perfectly flush with the surface.
  4. Remove any construction debris and the protective film.

Installation warning

Leave the protective film on the profile until construction is complete; it protects the profile throughout the work. Keep in mind that overlay models must be installed according to the stated joint width.

Installing the profile in a wider or narrower joint, even if the profile itself allows it, will affect its overall movement capacity. The load-bearing figure applies to occasional traffic. Never place permanent loads on the surface of the profile: this could cause irreparable damage that would limit the functionality of the profile.

Cleaning and maintenance

Cleaning must be carried out regularly with water and a neutral cleaning agent. Then rinse with clean water and dry to remove excess moisture. Stubborn dirt can be removed with mildly abrasive cleaning agents.

Do not use steel wool, abrasive products, strong acids (hydrochloric and perchloric), strong alkalis (caustic soda or ammonia) or carbonate solutions. Do not use citric acid either, as it dissolves the protective oxide layer on the aluminium surface. Waxes, petroleum jelly, lanolin and similar products are not suitable. Avoid solvents containing haloalkanes (hydrofluoroethers or chlorinated solvents) and setting accelerators containing chlorides (use chloride-free accelerators).

Clean and maintain the profile regularly so that dirt deposits do not build up, as they could hinder the free movement of the parts and impair their function.

We sell by the piece, minimum order 1 piece. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.

Specifications

Material aluminium
Finishes natural aluminium
Joint width (a) 50 mm
Visible width (b) 190 mm; perimeter version 117 mm
Height (h) 3.6 mm
Length 2.5 m
Permitted horizontal movement 10 mm (+7/−3 mm)
Permitted vertical movement 10 mm (±5 mm)
Use exterior, interior, floor, wall, recyclable material
Alloy 6063 – T6
Reaction to fire M0 (UNE 23-727-90)
Tensile strength Rm 215 N/mm²
Yield strength 170 N/mm²
Minimum elongation A 8 %
Brinell hardness (HB) 75
Formability very good
Corrosion resistance very good
Permitted load occasional traffic: passenger cars or trolleys with pneumatic tyres (DIN 1072) up to 35 kN, occasionally heavy traffic with pneumatic tyres
Pack 1 pcs
Minimum order 1 pcs
Delivery within 12 working days subject to the supplier's stock availability

More products

Full range