Structural expansion joint profile all-aluminium, joints up to 100 mm
Price for 1 piece (2.5 m) 7 972.50 Kč (318.90 €) excl. VAT 9 646.73 Kč (385.87 €) incl. VAT
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability
Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice
If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.
- For structural joints up to 100 mm wide
- Installed on the finished floor, also suitable for refurbishments
- Horizontal movement up to 30 mm, vertical 16 mm
- Ribbed anti-slip surface for high-traffic areas
- Perimeter version also available
- Sold by the piece
- Height 3.6 mm, length 2.5 m
Prices by finish
Once you click a finish, the price per linear metre and per piece, depending on the size, is shown. The profile is 2.5 m long. We sell by the piece, minimum order 1 piece. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability. Prices are excl. VAT.
Natural aluminium
In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
| Width | Version | Price per lm | Price per piece | Pack |
|---|---|---|---|---|
| 100 mm | standard | 3 189,00 Kč | 7 972,50 Kč | 1 pcs |
| 100 mm | perimeter | 3 508,00 Kč | 8 770,00 Kč | 1 pcs |
Description
An all-aluminium profile system, designed for installation in covered movement joints up to 10 cm wide. Thanks to its shape with ball joints, it allows movement in several directions. The dimensions of the side parts allow secure anchoring using the fixings supplied.
It has a ribbed anti-slip visible surface and is therefore a suitable model for high-traffic zones. A corner version for perimeter (peripheral) joints is also available. It is supplied in the natural colour of aluminium.
The profile is supplied pre-assembled, with a protective film and in the closed position. The correct position is set on site during installation. The profile is installed on the joints of finished floors once the work is complete. Its construction with sliding parts allows it to absorb large movements in several directions. The profile is screwed to the finished floor and, thanks to its shape, allows smooth passage of cars, trolleys or stretchers.
Fire-resistant cords are available for the profile.
Use
Buildings and structural elements are subject to deformation and geometric changes. Movement joints help limit the impact of these changes on the whole building and prevent defects from arising.
The Spanish building code CTE, in its section DB-SAE (Actions on building structures), states that in concrete or steel buildings movement joints should be designed so that no continuous elements longer than 40 m arise.
The profile is a solution for structural joints and consists of an assembly of sliding aluminium parts. It absorbs the stresses and deformations caused by building elements and prevents cracks and other defects from arising. It is suitable for installation in a floor, but can also be installed on a wall.
It is designed to be installed in large joints in buildings that are already complete, which makes it the ideal choice for refurbishments and renovations or for projects where movement joints were not planned.
Material
The profile is made by extruding aluminium. Aluminium is a material with excellent chemical and physical-mechanical properties. It is light, strong, flexible, ductile and highly durable. Its resistance to corrosion and fire is very good.
Aluminium is highly valued and used in many industries, especially in construction. It can be processed in many ways to obtain a wide variety of shapes with high performance in use. It is a recyclable material.
Permitted traffic
Occasional traffic. The profile withstands light and medium loads, including pedestrian and vehicle traffic. It is suited to the passage of passenger cars or trolleys with pneumatic tyres (DIN 1072) up to 35 kN and occasionally to heavy traffic with pneumatic tyres.
Installation
The profile is supplied pre-assembled, with a protective film and in the closed position. The correct position must be set on site during installation. The profile is installed on the joints of finished floors. The width of the structural joint is a requirement set in the project. Make sure the chosen model matches the specified properties. When installing, follow these steps:
- Make sure the surfaces on which the profile is installed are free of dust and grease.
- Place the profile in the joint space and slide the sides so that they fit tightly against the edges of the joint. The forks must be centred and allow free movement. This model has a centre plate that must be centred to preserve the possibility of movement in both directions.
- Fix the profile with the screws supplied into the holes in the mounting wings. The screws must be flush with the surface. Make sure the screw supplied is suitable for your substrate.
Installation warning
This model is very easy to install. Keep in mind that overlay models must be installed at the stated joint width. The profile must not be installed in a narrower or wider joint, as this would change its performance properties.
The load-bearing figures apply to occasional traffic. A permanent load must never be placed on the surface of the profile, as this could cause irreparable damage that would limit the functionality of the profile.
Cleaning and maintenance
Cleaning must be carried out regularly with water and a neutral cleaning agent. Then rinse with clean water and dry to remove excess moisture. Stubborn dirt can be removed with mildly abrasive cleaning agents.
Do not use steel wool, abrasive products, strong acids (hydrochloric and perchloric), strong alkalis (caustic soda or ammonia) or carbonate solutions. Do not use citric acid either, as it dissolves the protective oxide layer on the aluminium surface. Waxes, petroleum jelly, lanolin and similar products are not suitable. Avoid solvents containing haloalkanes (hydrofluoroethers or chlorinated solvents) and setting accelerators containing chlorides (use chloride-free accelerators).
Clean and maintain the profile regularly so that dirt deposits do not build up, as they could hinder the free movement of the parts and impair their function.
We sell by the piece, minimum order 1 piece. In stock at an external supplier, delivery within 12 working days subject to the supplier's stock availability.
Specifications
| Material | aluminium |
|---|---|
| Finishes | natural aluminium |
| Joint width (a) | 100 mm |
| Visible width (b) | 240 mm; perimeter version 170 mm |
| Height (h) | 3.6 mm |
| Length | 2.5 m |
| Permitted horizontal movement | 30 mm (+20/−10 mm) |
| Permitted vertical movement | 16 mm (±8 mm) |
| Use | exterior, interior, floor, wall, recyclable material |
| Alloy | 6063 – T6 |
| Reaction to fire | M0 (UNE 23-727-90) |
| Tensile strength Rm | 215 N/mm² |
| Yield strength | 170 N/mm² |
| Minimum elongation A | 8 % |
| Brinell hardness (HB) | 75 |
| Formability | very good |
| Corrosion resistance | very good |
| Permitted load | occasional traffic: passenger cars or trolleys with pneumatic tyres (DIN 1072) up to 35 kN, occasionally heavy traffic with pneumatic tyres |
| Pack | 1 pcs |
| Minimum order | 1 pcs |
| Delivery | within 12 working days subject to the supplier's stock availability |
More products