FABER TILE CLEANER

FABER TILE CLEANER

302 Kčexcl. VAT/pc365,42 Kčincl. VAT/pc
12.08 €excl. VAT/pc14.62 €incl. VAT/pc

Price per 1 box (12 pcs) 3 624 Kč (144.96 €) excl. VAT 4 385.04 Kč (175.40 €) incl. VAT

In stock at an external supplier, delivery within 15 working days depending on availability at the supplier

Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice

If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.

Features
  • Concentrated formulation
  • Effectively removes surface coatings
  • High cleaning action
  • Dissolves and draws out dirt from deep down
  • Pack: 1 L, 5 L
  • Coverage: 10–15 m²/l

Price for purchase of a whole box

The price per piece applies when a whole box is purchased.

Pack Purchase Box Price per piece Price per box
1 L Whole box 12 pcs 302,00 Kč 3 624,00 Kč
5 L Whole box 4 pcs 1 354,00 Kč 5 416,00 Kč

Prices are excl. VAT.

Price for purchase by the piece

For purchases by the piece we charge a 10 % unpacking surcharge, which is already included in the price.

Pack Purchase Price per piece
1 L Per piece (10 % surcharge for unpacking) 332,00 Kč
5 L Per piece (10 % surcharge for unpacking) 1 489,00 Kč

Prices are excl. VAT.

Description

Acidic cleaning product for deep cleaning of surfaces and for removing coatings and residues.

This acidic cleaning product penetrates the roughness and pores of the material, dissolves and draws out accumulated dirt and restores the original look of the surface even with old, hardened residues. It also removes coatings left by unsuitable cleaners and by cement or epoxy grouts and fillers, for which it is used undiluted. For ordinary cleaning one part of the product is diluted with two to three parts of water, left to act for 10 to 20 minutes while scrubbing with a machine with a white pad or a brush, and the floor is rinsed generously with water. Coverage is 10 to 15 m² per litre.

TILE CLEANER is a water-based acidic cleaning product, developed for deep cleaning of surfaces. Thanks to its special formulation, the product penetrates deep into the roughness and pores of the material to which it is applied.

TILE CLEANER is thus able to dissolve and draw out the dirt accumulated in the material, even in the case of particularly old and hardened residues, and makes it possible to restore the original appearance of the material.

Suitable for:

  • Quartz-resin agglomerate
  • Slate
  • Sandstone
  • Basaltina – lava stone
  • Fused basalt
  • Glazed ceramics
  • Clinker
  • Cotto (fired clay tiles)
  • Cement grout joints
  • Granite
  • Lappato porcelain stoneware (gres)
  • Polished porcelain stoneware (gres)
  • Natural (matt) or structured porcelain stoneware (gres)
  • Structured porcelain stoneware (gres)
  • Porphyry
  • Quartzite
  • Terracotta
  • Tuff

Manufacturer video on YouTube

Another manufacturer video on YouTube

Specifications

Manufacturer FABER Chimica, Italy
Pack 1 L, 5 L
Coverage 10–15 m²/l
Use indoors and outdoors
Warning Acidic product (pH 1.5 ± 0.5), do not use on acid-sensitive materials such as marble or limestone.

Technical information

Translation of the manufacturer's technical data sheet.

Characteristics and advantages
  • Concentrated formulation
  • Effectively removes surface coatings
  • High cleaning action
  • Dissolves and draws out dirt from deep down
Areas of use

The product is suitable for application indoors and outdoors.

The product is suitable for application on: quartz-resin agglomerate, slate, sandstone, Basaltina lava stone, fused basalt, glazed ceramics, clinker, cotto, granite, polished porcelain stoneware (gres), natural porcelain stoneware (gres), structured porcelain stoneware (gres), reconstituted stone (Ecopietra), porphyry, quartzite, terracotta, tuff

Coverage

10–15 m²/l

Application tools

Single-disc machine, white pad, brush with white bristles

Application procedure

Before applying the product, always carry out a preliminary test on a part of the surface that is not exposed to view, to assess its suitability for the intended use

Preparing and cleaning the substrate

  • Before washing we recommend removing any surface residues, such as dust, debris and coarse dirt, dry with a broom or vacuum cleaner.
  • Wait until the treated surface is dry.
  • If present, protect adjacent surfaces to which you do not want to apply the product.
  • Apply the product to substrates with a surface temperature from +5 to +40 °C

Application

  • Dilute the product with clean water. Pour 1 part of the product into 2 or 3 parts of water depending on the resistance of the residues and dirt you want to remove. To remove surface coatings the product is used neat.
  • Start working the product by rubbing the surface with the tool you prefer
  • Leave the product to act for 10 to 20 minutes, during which keep rubbing the surface with the tool being used to boost the cleaning action of the product.
  • When the work is finished, remove the product residues and rinse the whole floor generously with water. If the result has been achieved only partially, repeat the application in the same way and, if necessary, slightly increase the concentration of the product in the water.

Opening to traffic

After the residues have been thoroughly removed and the substrate rinsed with water, there is no need to wait any longer.

Complementary maintenance products

After treatment with TILE CLEANER, keep the surface clean with the most suitable Faber product, for example NEUTRAL CLEANER or FLOOR CLEANER, chosen according to the properties of the surface.

Instructions and recommendations
  • Do not apply the product to an overheated or wet substrate
  • When applying to freshly laid or freshly grouted surfaces, wait for the grout and adhesive to cure completely.
  • Do not use in combination with other chemical products
  • Do not use on acid-sensitive materials such as marble or limestone
  • Before applying the product to the whole surface a preliminary test must be carried out on a part of the material that is out of sight or has not been laid, to assess its suitability for the intended use.
Cleaning the tools

When finished, the tools used can be washed with water.

Physical and technical data
Appearance Liquid
Colour Colourless
Odour Lemon
pH 1.5 ± 0.5
Specific gravity at 20 °C 1010 ± 10 g/l
Storage

Keep the packaging tightly closed in a cool, dry place.

Shelf life

36 months in original sealed packaging stored in a cool, dry place.

Pack
  • 1 l bottles – 12 bottles per box
  • 5 l canisters – 4 canisters per box
Accidental spill

Absorb the product with absorbent material (paper, sawdust, vermiculite) and place it in the most suitable waste container.

Safety

When handling the product, always use the most suitable personal protective equipment and follow the information given in the product's safety data sheet.

More products

Full range
FABER CEMENT REMOVER 2.0
  • Acid cleaner for post-construction cleanup: removes cement, efflorescence and inorganic deposits
  • Suitable for porcelain stoneware, glazed ceramics, clinker, granite, terracotta and other acid-resistant materials
  • Concentrate, coverage 10–15 m²/l, indoors and outdoors
189 Kč / ks bez DPH
FABER EPOXY CLEANER
  • Removes epoxy residues and films left after tiling and grouting
  • Ready-to-use cleaner for the final post-construction cleanup
  • Gentle on materials and grout joints, indoors and outdoors
471 Kč / ks bez DPH
FABER FLOOR CLEANER
  • Neutral cleaner for everyday cleaning of porcelain stoneware
  • No rinsing needed, leaves no films or residues
  • Highly concentrated, coverage 900–1100 m²/l
193 Kč / ks bez DPH