Before applying the product, always carry out a preliminary test on a part of the surface that is not exposed to view, to assess its suitability for the intended use
Preparing and cleaning the substrate
- Clean the substrate carefully and make sure to remove dust and dirt from the surface.
- If present, protect adjacent surfaces to which you do not want to apply the product.
- Apply the product to substrates with a surface temperature from +5 to +40 °C
Application
The product is used neat. Apply SILI-GONE directly to the stain you want to remove. Work the product with the white pad provided to boost the cleaning action.
Leave the product to act on the surface and rub it with the pad from time to time. The contact time of the product is 15 to 30 minutes, which must be judged according to the extent of the residue, how old it is and the degree of absorption of the surface.
After the set time has elapsed, proceed to remove the product and its residues. To remove SILI-GONE you can use paper or absorbent cloths; remove the residues by pressing or wiping until they are completely removed. Rinse with water and then clean the treated spot with CLEAN 360.
For hardened coatings or residues we recommend a second application of the product, carried out with a white pad using circular movements while applying pressure to the pad,
If necessary, repeat the application.
When working on particularly absorbent surfaces, such as raw natural stone or cotto, the surface you want to treat must be lightly dampened with water before applying the product, so that the material does not absorb the product excessively.
Opening to traffic
After rinsing the surface with water, wait for the floor to dry completely before opening it to foot traffic again.