FABER DEEP ENHANCER

FABER DEEP ENHANCER

886 Kčexcl. VAT/pc1 072,06 Kčincl. VAT/pc
35.44 €excl. VAT/pc42.88 €incl. VAT/pc

Price per 1 box (12 pcs) 10 632 Kč (425.28 €) excl. VAT 12 864.72 Kč (514.59 €) incl. VAT

In stock at an external supplier, delivery within 15 working days depending on availability at the supplier

Free shipping from 5 000 Kč (200 €) excl. VAT, payment by cash on delivery or by invoice

If you need a different quantity, please call +420 737 246 887 to clarify the details of your order.

Features
  • Certified safe for use on surfaces in contact with food
  • UV resistant
  • Developed for surfaces with low absorbency
  • Does not yellow over time
  • Pack: 1 L, 5 L
  • Coverage: 20–30 m²/l

Price for purchase of a whole box

The price per piece applies when a whole box is purchased.

Pack Purchase Box Price per piece Price per box
1 L Whole box 12 pcs 886,00 Kč 10 632,00 Kč
5 L Whole box 4 pcs 4 129,00 Kč 16 516,00 Kč

Prices are excl. VAT.

Price for purchase by the piece

For purchases by the piece we charge a 10 % unpacking surcharge, which is already included in the price.

Pack Purchase Price per piece
1 L Per piece (10 % surcharge for unpacking) 975,00 Kč
5 L Per piece (10 % surcharge for unpacking) 4 542,00 Kč

Prices are excl. VAT.

Description

Solvent-based impregnating anti-stain treatment that enhances the shade, with a matt effect for all compact surfaces

This non-film-forming solvent-based stain-protection impregnation intensifies the colour and shade of very compact surfaces with minimal absorbency, such as ceramic, sintered porcelain (gres), agglomerated quartz or polished natural stone, and gives them a matt wet-look effect without a film. It also provides water repellency and stain resistance, is UV resistant and does not yellow over time. A thin layer is spread on a dry, clean substrate, after 5 to 10 minutes the excess is spread out again, and after about 20 to 30 minutes the residues are carefully removed. Coverage is 20 to 30 m² per litre.

DEEP ENHANCER is a non-film-forming, solvent-based impregnating protective anti-stain product that enhances the shade, specially developed for the colour-enhancing treatment of very compact surfaces or surfaces with minimal absorbency.

DEEP ENHANCER is used to intensify the colour and shade of more compact materials such as ceramics, porcelain stoneware (gres), agglomerated quartz and polished natural stone, giving a matt finish without forming a surface film.

Suitable for:

  • Marble-resin agglomerate
  • Quartz-resin agglomerate
  • Basaltina – lava stone
  • Crackle-glazed ceramics
  • Glazed ceramics
  • Clinker
  • Granite
  • Lappato porcelain stoneware (gres)
  • Polished porcelain stoneware (gres)
  • Natural (matt) or structured porcelain stoneware (gres)
  • Limestone
  • Marble
  • Travertine

Manufacturer video on YouTube

Specifications

Manufacturer FABER Chimica, Italy
Pack 1 L, 5 L
Coverage 20–30 m²/l
Use indoors and outdoors
Warning Solvent-based liquid with a flash point below 21 °C.

Technical information

Translation of the manufacturer's technical data sheet.

Characteristics and advantages
  • Certified safe for use on surfaces in contact with food
  • UV resistant
  • Developed for surfaces with low absorbency
  • Does not yellow over time
Areas of use

The product is suitable for application indoors and outdoors.

The product is suitable for application on: granite, limestone, marble, travertine, crackle-glazed ceramics, glazed ceramics, marble-resin agglomerate, quartz-resin agglomerate, lappato porcelain stoneware (gres). Polished porcelain stoneware (gres), natural porcelain stoneware (gres), structured porcelain stoneware (gres), fused basalt, clinker.

Coverage

20–30 m²/l

Application tools

Brush, fleece applicator, roller, cloth

Application procedure

Preparing and cleaning the substrate

  • Clean the substrate carefully and make sure to remove dust and dirt from the surface.
  • Do not apply DEEP ENHANCER to wet substrates.
  • Apply DEEP ENHANCER to substrates with a surface temperature from +5 to +40 °C
  • If present, protect adjacent surfaces to which you do not want to apply the product.

Application

Before applying the product, always carry out a test on a part of the surface that is out of sight, or on a tile that has not been laid, to assess its suitability for the intended use

  • Spread a thin and even layer of the product onto the dry, clean surface with the tool you prefer, taking care to create a layer that is as even and homogeneous as possible, covering the whole surface.
  • About 5–10 minutes after applying the product, spread the excess product again with the same tool you used for the application, taking care to spread it homogeneously so that the result is visually uniform once the treatment is finished.
  • About 20–30 minutes after applying the product, carry out a complete and careful removal of the residues, making sure to remove all excess in order to avoid greasiness problems later. This operation must be carried out by dry surface brushing with a traditional single-disc machine (1.5 HP, 175 rpm) with a white disc, a lambswool disc or wool and cotton accessories.
  • Alternatively, in the case of worktops, vertical surfaces or small areas, the residues can be removed with an orbital machine or by hand, using a disc or white pad or a compact felt cloth or a wool and cotton cloth.
  • To maximise the effectiveness of the stain protection, the intensity of the enhancing effect and the overall durability of the treatment, you can wait longer than 20–30 minutes before removing the residues, up to a maximum of 45–60 minutes, to promote complete and deep penetration of the product into the structure of more compact materials. The surface residue may then be slightly more resistant when removing it.

Drying time

The product dries quickly, at the latest within 1–2 hours of application.

Opening to traffic

Open the surface to foot traffic about 4–6 hours after applying the product.

Complementary maintenance products

For routine cleaning of a surface treated with DEEP ENHANCER we recommend: NEUGEL or ALGAFLOOR, depending on the material.

For deep cleaning of a surface treated with DEEP ENHANCER we recommend: FABER 30 or DETERFUG, depending on the material.

Instructions and recommendations
  • If the product is applied as a surface anti-stain protection on a material that has already been treated with a deep water-repellent primer, wait for the previous treatment to dry completely before applying DEEP ENHANCER
  • Do not apply the product to a wet or damp substrate
  • Do not apply the product to an overheated substrate
  • Apply the product at a surface temperature from +5 to +35 °C
  • Do not apply the product when rain or frost is imminent, in fog or in high ambient humidity.
  • When applying to freshly laid or freshly grouted surfaces, wait for the grout and adhesive to cure completely.
  • Before applying the product to the whole surface it is advisable to carry out a preliminary test to assess its suitability.
  • When applying to porcelain stoneware (gres) and quartz, pay maximum attention to removing the residues.
Cleaning the tools

After application, the tools used can be washed with white spirit.

Physical and technical data
Appearance Liquid
Colour Transparent
Odour Solvent
Flash point (ASTM D 56) < 21 °C
Specific gravity at 20 °C 0.81 g/cm³
Storage

Keep the packaging tightly closed in a cool, dry place.

Shelf life

24 months in original sealed packaging stored in a cool, dry place.

Pack
  • 1 l bottles – 12 bottles per box
  • 5 l canister – 4 canisters per box
Safety

When handling the product, always use the most suitable personal protective equipment and follow the information given in the product's safety data sheet.

More products

Full range
FABER CEMENT REMOVER 2.0
  • Acid cleaner for post-construction cleanup: removes cement, efflorescence and inorganic deposits
  • Suitable for porcelain stoneware, glazed ceramics, clinker, granite, terracotta and other acid-resistant materials
  • Concentrate, coverage 10–15 m²/l, indoors and outdoors
189 Kč / ks bez DPH
FABER EPOXY CLEANER
  • Removes epoxy residues and films left after tiling and grouting
  • Ready-to-use cleaner for the final post-construction cleanup
  • Gentle on materials and grout joints, indoors and outdoors
471 Kč / ks bez DPH
FABER FLOOR CLEANER
  • Neutral cleaner for everyday cleaning of porcelain stoneware
  • No rinsing needed, leaves no films or residues
  • Highly concentrated, coverage 900–1100 m²/l
193 Kč / ks bez DPH